Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Ford_Focus_center_console_tray_with_ST_logo.stl | Primary model | 81.3 KB STL | Slice file | Slice file | Slice file | Check the overhangs at the top of the part for support needs in your slicer |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford Focus ST center console tray
Shared by
3DPrintedCarPartDescription
This is a remix of the Focus RS console tray by majingrim here: https://www.thingiverse.com/thing:3769851 I also used the ST logo text created by JackHydrazine here: https://www.thingiverse.com/thing:3849541 (but scaled down to 80% size) This should fit 2013-2018 Ford Focus STs. The "ST" text is very slightly lower (~0.5 mm) than the surrounding bottom of the tray, but it is clearly visible. I figured this would be a good depth to avoid trapping too much dirt and also allow for some contrasting paint in the future. The small ledges/tabs at the top of the part may be a challenging overhang for some printers, so use supports if you you want it to be perfect. I did not use supports and one layer of material was loose/sagging, but is hard to notice unless you look carefully and did not affect the fit in the vehicle.
Compatible Cars
Originally published on thingiverse.com by Josh Howell (chicken_lips) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
