Ford Mustang Trunk Panel Fastener (2011-2014) - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

Ford Mustang Trunk Panel Fastener (2011-2014)

0 downloads43 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a Fastener/Clip/Mount for the trunk panel of a Ford Mustang. There are already some fasteners on Thingiverse for the old model 2005-09 but not for the 11-14 model years. Since in Germany the US-Import cars need an orange turn signal, the trunk panel and taillights are removed to be modified. The OEM fastener usually no longer work after they were removed once. 4 of them, new from Ford cost around 15€ + shipping, that's why I recreated them. I own a 2013 model, it should definitely work with the 11-14 models. I don't know if the 2010 model uses this shorter mount or the longer older Version of the 2005-2009 years. I printed them in PLA with 0.2mm and Tree Supports, that worked completely fine.