FORD OVERHEAD CONSOLE REPAIR CLIP - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

FORD OVERHEAD CONSOLE REPAIR CLIP

0 downloads31 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I WAS TIRED OF USING PAPER OR NAPKINS TO HOLD MY OVERHEAD PANELS SHUT IN MY EXPLORER. I DECIDED TO DESIGN MY FIRST USEFUL 3D PRINTED OBJECT. IT TOOK A FEW TRIES TO GET IT RIGHT.... BUT NOW I AM HAPPY AS CAN BE THAT MY DOORS STAY CLOSED. I MADE SOME RELIEF IN THE BACK SIDE FOR ADHESIVE BUT UPON TEST INSTALLATION I DISCOVERED IT WORKS AS IS. NO ADHESIVE NECESSARY!! OF COURSE IF YOU DON'T WANT TO LOSE IT BETWEEN THE SEATS YOU CAN GLUE IT ON. OF COURSE YOU CAN ALWAYS MAKE MORE =) IT PRINTS BEST AS I LOADED IT AND THE SUPPORTS CAN BE A LITTLE DIFFICULT TO CUT OUT. BE CAREFUL!!