Files (3)

Knob_.stl

STL

447.6 KB

Knob_1half.stl

STL

287.7 KB

Knob_2half.stl

STL

160.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Knob_.stl	Printable file	447.6 KB STL	Slice file	Slice file	Slice file	Print in two pieces (Knob_1half.stl and Knob_2half.stl) and glue them together for easier printing and reduced warping risk.
Knob_1half.stl	Printable file	287.7 KB STL	Slice file	Slice file	Slice file	Print in two pieces (Knob_1half.stl and Knob_2half.stl) and glue them together for easier printing and reduced warping risk.
Knob_2half.stl	Printable file	160.0 KB STL	Slice file	Slice file	Slice file	Print in two pieces (Knob_1half.stl and Knob_2half.stl) and glue them together for easier printing and reduced warping risk.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Ford S-Max trunk plastic knob

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Fits 2018 Ford S-Max, not sure about other ones. Would suggest printing it in two peaces and sticking it together. There is option to print it as a whole piece. Print in PETG or some other heat resistant plastic.