Ford Sierra Mk2 Rear Speaker 4' Adapter - image

Files (1)

sierraket_v2.STL

STL

73.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 20%	100% solid	Recommendation
sierraket_v2.STL	Primary model	73.6 KB STL	Slice file	Slice file	Slice file	Print with a normal and a mirrored version for left and right speaker mounts

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Ford Sierra Mk2 Rear Speaker 4' Adapter

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The Ford Sierra has non standard rear speaker mounting holes, so I made a little bracket to be able to properly mount an aftermarket speaker, in this case, an Alpine SPG-10C2. I have attached the Solidworks file as well should anyone need to change measurements! Printing: The model is pretty straight forward to print, there is a face that is entirely flat. Works with any infill over 20%. In my case, I used cubic 20% in Cura. It took about 2h on my not so fast printer for each part. Note: It is best to print a normal version and a mirrored one, although it works either way! Hope this is useful!