Ford Transit Window Winder Knob and Fixing - image

Files (2)

Ford_Transit_Window_Winder_-_Fixing_v2.stl

STL

144.5 KB

Ford_Transit_Window_Winder_-_Knob_35mm.stl

STL

633.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Ford_Transit_Window_Winder_-_Fixing_v2.stl	Printable file	144.5 KB STL	Slice file	Slice file	Slice file	Print the fixing part with supports, split end up, and at a low speed
Ford_Transit_Window_Winder_-_Knob_35mm.stl	Printable file	633.1 KB STL	Slice file	Slice file	Slice file	Print the fixing part with supports, split end up, and at a low speed

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Ford Transit Window Winder Knob and Fixing

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

To replace a Ford Transit (2009) window winder knob, with attachable fixing. - push and twist/lock the fixing part into the existing winder arm. - push to snap fit the knob onto the fixing print the fixing with supports, split end up, and at a low speed to allow the filament to cool on each layer.