Fuel tank cap Daihatsu cuore l80 - image

Files (1)

Daihatsu_fuel_tank.stl

STL

184.3 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

16g

Based on 25% main infill across listed model files

Material cost

$0.39

Filament only at roughly $24/kg PETG / ASA

Print time

28m–46m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Daihatsu_fuel_tank.stl	Primary model	184.3 KB STL	15g $0.36	16g $0.39	35g $0.85	Ensure proper fitment by checking the creator's print settings and dimensions on the source page

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Fuel tank cap Daihatsu cuore l80

0 downloads29 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Summary Fuel tank cap for Daihatsuy cuore l80. Catalog note: Fuel tank cap Daihatsu cuore l80 is a 3D-printable car-part listing indexed for classified fitment Daihatsu Cuore L80. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.