Garmin GPS mount - later USB type for Skoda Citigo VW Up and SEAT Mi - image

Files (2)

Garmin_Citigo_Long_Neck.STL

STL

866.7 KB

Garmin_Citigo_Short_Neck_2.STL

STL

656.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Garmin_Citigo_Long_Neck.STL	Printable file	866.7 KB STL	Slice file	Slice file	Slice file	Ensure the print orientation is optimized for minimal supports in your slicer.
Garmin_Citigo_Short_Neck_2.STL	Printable file	656.2 KB STL	Slice file	Slice file	Slice file	Ensure the print orientation is optimized for minimal supports in your slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Garmin GPS mount - later USB type for Skoda Citigo VW Up and SEAT Mi

0 downloads55 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This has been superseded by https://www.thingiverse.com/thing:3833402 This is a Garmin GPS mount for the later type fitting in the 2017 Citigo, Up and Mi which have a USB socket under the base. The neck has as a 17.2mm radius ball to match the standard socket on Garmin GPS brackets. There are two designs, a short neck for the 4" GPS, and a longer neck to provide more clearance for 5" and larger screens. EDIT - after more use i suggest using the longer design for all satnav sizes. I have used the clever spring clip design from XenoBlaster so it is all in one piece.