Files (2)

2023Silverado_Garmin_mount_Base.stl

STL

2.0 MB

2023Silverado_Garmin_mount_TOP.stl

STL

786.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
2023Silverado_Garmin_mount_Base.stl	Mount / bracket	2.0 MB STL	Slice file	Slice file	Slice file	Print both parts at 60% to 100% scale as needed
2023Silverado_Garmin_mount_TOP.stl	Mount / bracket	786.4 KB STL	Slice file	Slice file	Slice file	Print both parts at 60% to 100% scale as needed

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Garmin Mount 2023 Silverado

0 downloads49 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This mount fits into (snugly) the top tray behind the Audio screen in a 2023 Silverado. Print both parts at 60% to 100%, you choice. No Supports are needed but Use ADHESION on the top part. Test thread the parts together and then superglue them at the correct angle. It will snugly fit into the tray I did test the size of the mounting sphere. That will fir well I did it in 2 parts to make the top part print better. The angle it would be at would have caused some trouble.