Glovebox Hinge + Catch for Holden Commodore VZ VY - image

Files (2)

catch.stl

STL

63.7 KB

hinge_clip.stl

STL

288.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
catch.stl	Printable file	63.7 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for the hinge clip to prevent warping
hinge_clip.stl	Clip	288.3 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for the hinge clip to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Glovebox Hinge + Catch for Holden Commodore VZ VY

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Car glovebox hinges are broken on the old commodore, along with the little catches that prevent the glovebox from opening too far. The original catch is made from rubber so the glovebox has a nice feel when it opens but ABS will do! I designed both parts in Fusion 360 and have attached the f3d files in case you want to improve or modify the design. Updated: I didn't notice the previous owner had tried to use doublesided mounting tape to fix the glovebox and so I had modelled the clip to include the thickness of the steel+tape. (I had a few drinks in me last night while I had the vernier callipers under the dash haha) I've since removed the mounting tape and remodelled the clip to suit just the steel as well as thickening the upper brace and top of the clip as well as making the top circular so the filament flows smoothly with no sharp rectangular angles which hopefully makes it stronger. They are fitted now and working well!