Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| CarbonPro_Drill_Guide.stl | Printable file | 143.1 KB STL | Slice file | Slice file | Slice file | Ensure a stable and level print bed for accurate drill guide placement |
| Drill_Guide.3mf | Printable file | 49.5 KB 3MF | Slice file | Slice file | Slice file | Ensure a stable and level print bed for accurate drill guide placement |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
GMC CarbonPro Tonneau Cover Drill Guide
Shared by
3DPrintedCarPartDescription
This drill jig is used on GM CarbonPro equipped trucks to locate and drill the hole for mounting a tonneau cover. You'll need a M6 J-Nut insert from Amazon and a corresponding M6-1 flange bolt. - Amazon M6 J-Nut: https://www.amazon.com/gp/product/B00C3MUY9K - Amazon M6-1 Flange Bolt: https://www.amazon.com/gp/product/B0040CWWS2 Along the bed rail under the plastic cap are six locations, 5 require the J-Nut and drilled hole through the bed rail cover. Drill the initial hole with a 1/4" drill. You may want to increase the hole diameter to 5/16" for a little more clearance during installation..
Compatible Cars
Originally published on thingiverse.com by Steve Dertien (DERTY_Garage) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
