GMC Sierra / Chevy 1500 center console base mounting plate preview

Files (1)

1_passenger_split_radio.stl

STL

717.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
1_passenger_split_radio.stl	Primary model	717.8 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

GMC Sierra / Chevy 1500 center console base mounting plate

0 downloads33 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or ASA for durability in vehicle conditions

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill for strength and moderate weight

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

GMC Sierra / Chevy 1500 center console base mounting plate. Works for model year 2025 GMC 1500 AT4 and similar models. I have created several sets of files: 1_passenger_split_radio and 1_passenger_split_radio. Used to mount a Motorola XPR 5500e radio with a cutout for RF + power. 2_single. the base plate as one large file. 3_ passenger_split and 3_driver_split. Which is the base plate split in two for easier printing. The base plate with the XPR 5500 holder works well with https://www.amazon.com/dp/B0CSFNG896?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1. With a reciprocating saw you can cut out a slot in the passenger cubby without cutting into the ribs.