Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| handyhalterung_v8.step | Printable file | 179.8 KB STEP | Slice file | Slice file | Slice file | Print with a temperature-resistant material to withstand summer heat in the car |
| handyhalterung_v8.stl | Printable file | 504.2 KB STL | Slice file | Slice file | Slice file | Print with a temperature-resistant material to withstand summer heat in the car |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Golf 4 Mountpoint for Smartphone mount
Shared by
3DPrintedCarPartDescription
This print clips in the compartment above the radio and has a very firm fit. (may scratch some surfaces but Golf4 are old enough that thats probably not a problem????) It has a hole to fit a USB cable through with a bit of a holding notch so the surplus cable length can be stowed in the compartment and won't be tugged out of it while driving. You may want to edit the size of the hole... The ballmount can be swapped with your own design and i used PT2.5x25 screws. (Often found in old electronic devices with plastic housings) The part that fits in the compartment is printed on its side for strength and a Material thats a bit more temperature resistant is probably a good idea for the summer, i printed it with PLA but it´s still winter...
Compatible Cars
Originally published on thingiverse.com by victor turban (Superpfusch) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
