ipod touch holder for headrest VW Golf 6 - image

Files (1)

Kopfstuetzenhalter.stl

STL

184.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Kopfstuetzenhalter.stl	Primary model	184.4 KB STL	Slice file	Slice file	Slice file	Print two pieces: one bottom and one top.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

ipod touch holder for headrest VW Golf 6

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This thing is heavily inspired by the headrest holder from honamia. It is a simple holder for you iPod or smartphone, which is mounted in between the two stands for the head rest. I made some tweaks and adapted it for a Volkswagen Golf 6 and the iPod touch. (Headrest stands diameter is 14mm an the middle-to-middle-distance is about 149mm) You need to print this thing two times. One bottom piece and one top piece.