Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Quad Lock for VW Golf 7

0 downloads35 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Summary If you download or collect one of my designs, please give me a like! I always enjoy my Quad Lock mount on my bicycles and wanted to get its advantages also when driving my car. Since there is no stock mount available that fit my needs, I designed one myself using ryan_slam's Quadlock GoPro adapter (https://www.thingiverse.com/thing:2288367). It fits perfectly into the cup holder of a Golf 7, and still may cups would fit. The four snappers will lock in and keep it rock solid in its place. Now my phone is available at my finger tips for navigation, and increases driver safety too. The entire design of Version 1.0 is quite solid and robust, yet not really elegant. Form follows function - lol:-) In future, if and when I may find the time, I will spend some more hours to make it smart. You may find my Qlock4G7 useful as well;-) Remark: if you get to know if Qlock4G7 fits into other Volkswagen, please let me know by leaving a comment here. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Yes Resolution: 0.2 Infill: 50% Filament: Anycubic PLA Notes: I printed it in the normal standup position as shown here in the stl picture. Using Cura "Tree support".