GS300/ Aristo (2nd gen) Guage pod ashtray - image

Files (2)

gs300_guage_pod_1_1_1.stl

STL

277.1 KB

aristo_guage_pod_1_1.stl

STL

241.4 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
gs300_guage_pod_1_1_1.stl	Printable file	277.1 KB STL	24g $0.57	26g $0.61	56g $1.35	Ensure proper fitment before gluing or screwing into place
aristo_guage_pod_1_1.stl	Printable file	241.4 KB STL	22g $0.54	24g $0.59	53g $1.28	Ensure proper fitment before gluing or screwing into place

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

GS300/ Aristo (2nd gen) Guage pod ashtray

0 downloads188 views0 likes

Shared by

Michael Chen

Verified

Description

52mm guage pod for the lexus gs300/ toyota aristo platform it replaces the center ashtray and angles the guage up towards the driver you can attach it to the trim if you find some screws that work for the front part and drill some holes in the replacement pod on the back tabs, i opted just to super glue it in a couple places as the screw holes in my trim were broken should work on either the lexus gs300 or toyota aristo, im currently using it in a 1998 toyota aristo text on the guage pod denotes which car its for.