Files (1)

cupholder_11-4-19_final_product.stl

STL

2.0 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
cupholder_11-4-19_final_product.stl	Mount / bracket	2.0 MB STL	46g $1.10	50g $1.20	110g $2.63	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Lexus IS300 cupholder

1 downloads177 views0 likes

Shared by

Michael Chen

Verified

Description

Is300 cupholder I designed while I was in school. The phone slot is designed for an iphone 11 with a slim case but will probably fit new iphones if its not a max. Rear holder fits a water bottle or soda can perfectly and the front holder cup holder is larger. Holes need to be drilled to mount. (will not fit on ender 3 printer):.