Lexus GS MK2 center console cup holder insert - image

Files (2)

GSBottleHolder_v4.stl

STL

136.2 KB

GSBottleHolder_empty.stl

STL

117.4 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
GSBottleHolder_v4.stl	Mount / bracket	136.2 KB STL	24g $0.57	26g $0.61	56g $1.35	Check orientation and supports in slicer for optimal print
GSBottleHolder_empty.stl	Mount / bracket	117.4 KB STL	22g $0.54	24g $0.59	54g $1.28	Check orientation and supports in slicer for optimal print

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Lexus GS MK2 center console cup holder insert

0 downloads161 views0 likes

Shared by

Michael Chen

Verified

Description

I made this for my friend who needed a phone holder for his EUDM 1998 GS300 This is a simple replica of the official insert, OEM number 55618-30010, and slots into a single channel on either side of the cup holder, I know some models have one channel on one side and 3 on the other but I don't have an OEM part for reference so this only has one Uploaded in two versions, one is solid and with chamfered top edges (closer to OEM look, needs supports to print the side channels) and the other one (with "empty" in the file name) is made to print upside down, looks worse but should be quicker to print Print at least in PETG to avoid it warping in the car in the summer.