Handle for Ford Transit Cargo area - image

Files (1)

Handle_for_Truck_v9.stl

STL

116.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Handle_for_Truck_v9.stl	Primary model	116.6 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

Handle for Ford Transit Cargo area

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Work on a Flightline and we use these trucks a lot. Typically people stand in the back while they are in motion... I think you can see where I'm going with this. Needed a way for people in the back to safely have a hold of something so they don't fall over when the cargo van is in motion. I present to you the 15 minutes in fusion360 fix!