Files (1)

seat-hook.stl

STL

355.6 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
seat-hook.stl	Primary model	355.6 KB STL	46g $1.10	50g $1.20	110g $2.63	Verify orientation and support needs in your slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Headrest hook

0 downloads198 views0 likes

Shared by

Michael Chen

Verified

Description

I was asked by a family member to print a hook to hang from the headrest for her purse. I looked around on Thingiverse but was not excited with what I found so I came up with this print-in-place creation that allows for flexibility around different seats. This is my first print-in-place item but as is, this shouldn't require much support and seems to be fairly strong.