Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| tacoknob_final.stl | Primary model | 154.4 KB STL | 14g $0.34 | 15g $0.37 | 33g $0.80 | Ensure the knob is oriented to minimize supports in the slicer |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Heater Knob for 00-04 Toyota Tacoma
Shared by
3DPrintedCarPartDescription
This is a replacement heater knob for 2000 to 2004 Toyota Tacomas. This knob slips on the heat control, fan speed, or damper control rods without the metal clip that fits into the factory knobs.
Compatible Cars
Originally published on thingiverse.com by Micah Vogel (micahvogel) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
