Heater Tube Cap for Volkswagen Beetle - image

Files (2)

HEATER_TUBE_CAP_BLANK.obj

OBJ

171.2 KB

HEATER_TUBE_CAP_BLANK.stl

STL

71.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
HEATER_TUBE_CAP_BLANK.obj	Cover / cap	171.2 KB OBJ	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
HEATER_TUBE_CAP_BLANK.stl	Cover / cap	71.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Heater Tube Cap for Volkswagen Beetle

0 downloads71 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Just a simple heater tube cap for a air cooled VW Beetle. This was made for a '73 Standard Beetle and I am not sure if it will fit other years. The model uploaded is blank. You can print as is or put your own design on it. I have included the OBJ file for customizing.