Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 15% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
VW Aircooled Type 1 Spark Plug Wire Clip
Shared by
3DPrintedCarPartDescription
Replace those lost/broken/missing plug wire holders with a new one! 3 needed per engine. Flip 90 deg on Y axis for best results. 15% infill, 3 shells full support. I used Nylon But ABS should work with some fine tuning.(filling) Do Not use PLA.
Compatible Cars
Originally published on thingiverse.com by Diego Mendoza (Oldbuggy) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Heater Tube Cap for Volkswagen Beetle
License: CC BY
View & download STL files
Shockabsorber cap for old Volkswagen Beetle /Stoßdämpfer Abdeckung für alte VW Käfer
License: CC BY
View & download STL files
VW-Audi Washer Fluid Reservoir Cap
Volkswagen, Audi
License: CC BY
View & download STL files
Oil Cap Socket for 74mm for VW, BMW vehicles
BMW
License: CC BY
View & download STL files
Volkswagen MK4 Battery Hold Down for Golf / Jetta
License: CC BY
View & download STL files
BMW X5 E70 Center Console Blind Plate
BMW
License: CC BY
View & download STL files
