Files (1)

H1_bulb.stl

STL

41.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 20%	100% solid	Recommendation
H1_bulb.stl	Primary model	41.1 KB STL	Slice file	Slice file	Slice file	Print with a light fan for optimal results

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Honda Civic HID adaptor

0 downloads45 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Universal HID kits don't cater for the Honda adapter set-up. I had the default HID set-up installed but it was proper ropy. This adapter holds the bulb in the perfect position and seals like OEM. I'm super pumped with the design and printed in fine mode in PETG. No overhangs so can be printed hot with a light fan. Can't comment on long term durability at this stage but 20% infill was used, but there aint much infill anyway.