Morimoto mled 2.0 Driver mount for 01-05 Civic - image

Files (1)

civic_mled_mount_v1.stl

STL

68.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
civic_mled_mount_v1.stl	Mount / bracket	68.1 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Morimoto mled 2.0 Driver mount for 01-05 Civic

0 downloads63 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Morimoto mled 2.0 Driver mount for 01-05 Honda Civic This mount is designed to hold the LED driver under the headlights. I believe these headlights had some type of HID ballast mount design but never used. So I designed a mounting adapter to make use of the three mounting holes and this will hold the mled driver onto it. No more random zip tied ballast. This mount can also be used in other hondas of this year as they're similar in mounting on the underside of the headlights. This is perfect for users that are doing the Morimoto BI-LED: MORIMOTO M LED 2.0 retrofit for this year's civic.