Honda CRV Grille Emblem (2nd generation 2002-2004) - image

Files (1)

Honda_CRV_gen2_grill_H.stl

STL

3.1 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Honda_CRV_gen2_grill_H.stl	Primary model	3.1 MB STL	Slice file	Slice file	Slice file	Use a grid pattern for support material with a spacing of 7mm for optimal results

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Honda CRV Grille Emblem (2nd generation 2002-2004)

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is not an easy part to print. Please read through details and watch video before trying to print. See video @ http://dai.ly/x6f6zqt ![3D Printed H Honda front grill emblem for 2nd generation CRV](http://dai.ly/x6f6zqt) Yes, this is a remix of the Honda Key Chain. The key ring hole was removed, it was resized and threads were added using Metric Screw Thread Library http://www.thingiverse.com/thing:31363 Support Material settings Type = Grid Pattern spacing = 7mm Infill Angle = 90 degrees (the 45 degree default makes my Y axis move a bit funky) Interface Layers = 9 layers X and Y Distance = 2.5mm (you might be able to go 2mm but less than that and you will probably goober the threads) Z Gap = 6 layers