Files (4)

Display_Mount.stl

STL

492.5 KB

Display_Mount_AIO.stl

STL

595.1 KB

Display_Mount_AIOv2.stl

STL

604.4 KB

Mount_Plate.stl

STL

611.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 10%	100% solid	Recommendation
Display_Mount.stl	Mount / bracket	492.5 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal support generation
Display_Mount_AIO.stl	Mount / bracket	595.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal support generation
Display_Mount_AIOv2.stl	Mount / bracket	604.4 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal support generation
Mount_Plate.stl	Mount / bracket	611.0 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal support generation

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Honda CRV ProClip Mount

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Summary I have used ProClips for many years now in many of my cars. Recently, I purchased a 2018 Honda CRV but hated both available mounts, so I designed my own in Fusion 360. I was learning Fusion 360 at the same time which is why there are two design methods (split and All-In-One). The second AIO design has a small hole that allows for a resqme Keychain Car Escape tool to be attached and available since the car is equipped with a keyless ignition. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes Infill: 20% Notes: The separately designed parts can be assembled with an 8mm bolt and do not need support to be printed. The all in one (AIO) designs do need support, but only from the build plate.