iPhone 6 Mophie case holder for 2016 Honda CRV - image

Files (2)

cellbox2.stl

STL

390.4 KB

crvholder2.stl

STL

47.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
cellbox2.stl	Printable file	390.4 KB STL	Slice file	Slice file	Slice file	Ensure proper fit in the gear shifter area before printing
crvholder2.stl	Mount / bracket	47.6 KB STL	Slice file	Slice file	Slice file	Ensure proper fit in the gear shifter area before printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

iPhone 6 Mophie case holder for 2016 Honda CRV

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I couldn't find a cell holder I liked for my mom-mobile so I made this one that fits in the gear shifter and is out of the way. It works really well. * Caution, the gear shifter is not usable when the holder is in place * I use this holder for longer drives. - The base was printed at 20% infill to retain some flexibility for the clips - The post was printed at 50% and trimmed with a Dremel tool once the desired height was figured out. - The cell holder was printed at 30% infill. Enjoy!