Honda Insight Switch Mount and Blanking Plates - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Honda Insight Switch Mount and Blanking Plates

0 downloads29 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I'm working on a project where one of my goals is to not to make any permanent alterations to my car, but I do need to mount a switch. Many cars have "blanking plates" the fill the holes where buttons would go for options that you didn't order or that aren't available in your market. Usually drilling holes in one of these plates is a harmless enough way to mount a switch, but in this case I wanted the switch to be mounted flush, and I have a 3D printer, so I popped them out of the dash and took some measurements to make my own.