Files (4)

base.stl

STL

582.5 KB

fake_nut.stl

STL

192.7 KB

top_pattern_with_text.stl

STL

3.2 MB

top_pattern_without_text.stl

STL

2.9 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
base.stl	Printable file	582.5 KB STL	Slice file	Slice file	Slice file	Print the base upside down as instructed by the designer
fake_nut.stl	Printable file	192.7 KB STL	Slice file	Slice file	Slice file	Print the base upside down as instructed by the designer
top_pattern_with_text.stl	Printable file	3.2 MB STL	Slice file	Slice file	Slice file	Print the base upside down as instructed by the designer
top_pattern_without_text.stl	Printable file	2.9 MB STL	Slice file	Slice file	Slice file	Print the base upside down as instructed by the designer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Hub Cap (GMC Sierra)

0 downloads46 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Reverse engineered a hubcap off a 1988 GMC Sierra. It has a 6 bolt pattern, so should fit other vehicle models. Print the base upside down. Print 6 of the 'fake nuts' and insert them into the base. The top piece then fits over top the fake nuts. I glued everything together. It's a friction fit over the 6 bolt pattern. Designed in FreeCAD - I can upload the CAD file if anyone needs to tweak it.