Files (4)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Bracket_Down.stl | Mount / bracket | 2.2 KB STL | 8g $0.20 | 9g $0.22 | 20g $0.47 | Small functional file: print slowly; consider 80–100% infill for durability. |
| Bracket_Up.stl | Mount / bracket | 2.2 KB STL | 8g $0.20 | 9g $0.22 | 20g $0.47 | Small functional file: print slowly; consider 80–100% infill for durability. |
| Bracket_Passenger_Side.stl | Mount / bracket | 2.2 KB STL | 8g $0.20 | 9g $0.22 | 20g $0.47 | Small functional file: print slowly; consider 80–100% infill for durability. |
| Bracket_Driver_Side.stl | Mount / bracket | 2.2 KB STL | 8g $0.20 | 9g $0.22 | 20g $0.47 | Small functional file: print slowly; consider 80–100% infill for durability. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Hummer H1 Cabin / Interior Filter Holder
Shared by
3DPrintedCarPartDescription
Hummer H1 Cabin / Interior Filter Holder. Use a 30mm thick cabin filter and cut to 145 by 135mm. Just hang on the edes of the original box en lay in the filter element. Each side has it's own bracket like the filename says.
Compatible Cars
Originally published on thingiverse.com by Berend Smit (Bert_V) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
