Hyundai Ioniq Low Beam Bulb Change Tool - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

Hyundai Ioniq Low Beam Bulb Change Tool

0 downloads73 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Anyone who has tried to change the lowbeam bulb on their Hyundai Ioniq knows all too well what a pain it is to get out. Created this tool to slide onto the plug for the bulb, which allows you to use a standard 1/4" socket to remove it and reinstall it. Hopefully it helps someone else save their fingers and knuckles when they need to change their own bulbs. There are two files - they are identical, except one says "IONIQ LOW BEAM" on the bottom if you tend to forget what the custom tool in your drawer is for.