Files (1)

Cover.obj

OBJ

857.8 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

28g

Based on 25% main infill across listed model files

Material cost

$0.68

Filament only at roughly $24/kg PETG / ASA

Print time

49m–1.3h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Cover.obj	Cover / cap	857.8 KB OBJ	26g $0.63	28g $0.68	62g $1.50	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Hyundai roof clip cover

0 downloads59 views0 likes

Shared by

Alfred

Verified

Description

Someone stole my roof clip cover, so I made a new one. It fits perfectly on my i30 Fastback on the right side of the car. Not sure if it needs to be mirrored to fit the other side. Also I have put AMD logo there, because the default arrow looked boring. Will add photos later. I can also add step files if someone is interested. Enjoy!