Pergo Hyundai Sonata Cel Phone Bracket - image

Files (2)

PhoneMount_for_2014_Hyundai_Sonata.stl

STL

2.9 MB

Mount_Version_2.STL

STL

666.1 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Recommended kit

50g

Based on 15% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 15%	100% solid	Recommendation
PhoneMount_for_2014_Hyundai_Sonata.stl	Mount / bracket	2.9 MB STL	36g $0.86	33g $0.78	85g $2.04	Ensure proper adhesion to prevent warping
Mount_Version_2.STL	Mount / bracket	666.1 KB STL	19g $0.46	17g $0.42	45g $1.08	Ensure proper adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Pergo Hyundai Sonata Cel Phone Bracket

0 downloads200 views0 likes

Shared by

Michael Chen

Verified

Description

New version 2.0 added.. Better Fit and stronger 2014 Hyundai Sonata Cel Phone Bracket This bracket slides around the temperature knobs and holds a phone sized about the size of a S3, S4, S5, S5 Active, S6. If the distance between your car temperature knobs is 88mm, then this will be a stock fit for your car. It's normal to get 5-6 strings sagging on the front lip during printing. just cut them away after print. I printed at 10-15% infill and the device is really strong. No more hunting for your phone after you turn the corner. Included the source files so that you can resize/modify to your liking.