iPhone 11 pro mount for Volvo XC60 dash - image

Files (2)

iPhone11_PRO_Holder.stl

STL

111.8 KB

iPhone11_PRO_Holder_with_UAG.stl

STL

166.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
iPhone11_PRO_Holder.stl	Mount / bracket	111.8 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping
iPhone11_PRO_Holder_with_UAG.stl	Mount / bracket	166.1 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

iPhone 11 pro mount for Volvo XC60 dash

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is an iPhone 11 pro mount for Volvo XC60 dash. A alternative STL is also available to welcome the iPhone with UAG Pathfinder case. Thanks macropin for the inspiration (https://www.thingiverse.com/thing:988170) If you like this model, feel free to tip me. As well as comments, this will be very much appreciated:-).