Files (5)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| CD_Bracket_Left.stl | Choose left variant | 21.9 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| Phone_Cradle_Right.stl | Choose right variant | 45.3 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing. |
| Lowering_Arm_Left__Right.stl | Choose left variant | 8.1 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| Phone_Cradle_Left.stl | Choose left variant | 41.6 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing. |
| CD_Bracket_Right.stl | Choose right variant | 20.7 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
iPhone 6 & 7 In Car Holder (Jaguar X-Type)
Shared by
3DPrintedCarPartDescription
I was looking for a iPhone holder for my car, the one that seemed to suit most of my requirements was this http://www.thingiverse.com/thing:609134 but it didn't totally work. I have a 2004 Jaguar X-type so I redesigned basically all elements of this to make it better fit the vehicle. As the photos show, it still allows access to all the heater controls and the AC LCD screen, it blocks off the CD player controls but as this thing mounts in the CD slot, you wont be using them anyway. The piece prints in 3 sections, the CD Bracket, the iPhone Cradle and the Lowering Arm. Due to the size of my printing bed, I had to split all the parts into two, so there is a Left and Right for all the pieces aside from the lowering arm. This piece is symmetrical and so you just print 2x of these. The CD tray section for some reason isn't an amazing fit and on bumps and things it can come loose, If anyone has any suggestions how to fix this, let me know or feel free to remix it.
Compatible Cars
Originally published on thingiverse.com by Chris Hawkins (computerstar2000) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
