Files (2)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| karl_iphone_holder_part02.stl | Mount / bracket | 287.6 KB STL | 17g $0.41 | 19g $0.45 | 41g $0.99 | Ensure a stable printing surface to prevent part warping |
| karl_iphone_holder_part01.stl | Mount / bracket | 163.0 KB STL | 14g $0.34 | 15g $0.37 | 34g $0.81 | Ensure a stable printing surface to prevent part warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
iPhone 6 plus with slim silicone cover, Holder/Mount Opel Karl. Vertical and horizontal
Shared by
3DPrintedCarPartDescription
iPhone 6 plus mount, both vertically and horizontally. Fits with iPhone 6 plus with slim silicone cover built for Opel Karl. Maybe it will fit the iphone 7 and 8 plus, and in other car models. If you have a Oneplus 5t with big cover, it will work for that too.
Compatible Cars
Originally published on thingiverse.com by Rolf Petersen (rolf3d) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
