Files (2)

Nissan_Leaf_dash_mount.stl

STL

324.8 KB

Phone_Holder_v5.stl

STL

45.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Nissan_Leaf_dash_mount.stl	Mount / bracket	324.8 KB STL	Slice file	Slice file	Slice file	Ensure a strong bond between the two parts if gluing or solvent welding
Phone_Holder_v5.stl	Mount / bracket	45.6 KB STL	Slice file	Slice file	Slice file	Ensure a strong bond between the two parts if gluing or solvent welding

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

iPhone Nissan Leaf mount

0 downloads43 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a snap-on phone mount for a iPhone SE + case to mount in a 2015 Nissan Leaf. It's split in two pieces to maximize strength and eliminate the need for significant supports (you might want supports on the phone holder, though). You can glue or solvent weld the two pieces together, or just use the car side to another mount of your liking. If you want to modify the original design, the original CAD is here: https://cad.onshape.com/documents/73ac72b9f34f5f383ef33801/w/f5f1f40e23c6fa4cdfecaf7f/e/743654112d49bd85c8504abf You can change the phone holder dimensions or the angle of the mount if you like. If you upload your creation back to Thingiverse, please tag my design on the remix, I like to see what people are doing with the designs.