Files (2)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| LeafWirelessChargerBracket.stl | Mount / bracket | 203.4 KB STL | 15g $0.37 | 17g $0.40 | 37g $0.88 | Ensure a secure mounting to prevent the bracket from coming loose while driving |
| LeafWirelessChargerBracket.stp | Mount / bracket | 362.3 KB STP | 19g $0.45 | 20g $0.49 | 45g $1.07 | Ensure a secure mounting to prevent the bracket from coming loose while driving |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Nissan Leaf - Phone Holder Bracket
Shared by
3DPrintedCarPartDescription
Fits most likely on all Nissan Leafs build between 2011 and 2017. Mine is used on a 2011 Leaf and fits perfectly. It is mounted in the position of the airbag status light (this can always be restored without any damage). To mount it, first remove the center dash panel by pulling on the bottom. then unscrew the airbag status light but keep the connector attached to prevent warnings. Use a tiewrap to attach the status light to the cable loom behind the dash so it doesn't fling around. Then mount the bracket using the same screws that were used for the airbag status light. After that you can mount the wireless charger using an M8 screw. The wireless charger has to be modified by tapping M8 thread in the back of the mounting plate. Products used: - Wireless charger: aliexpress.com/item/4000252294546.html - Dual USB Car charger: aliexpress.com/item/4000642795022.html - Flat USB cable 32cm: aliexpress.com/item/32864036755.html I used this thingiverse item to design the part: https://www.thingiverse.com/thing:3364710 See the link for more photo's how it looks behind the dash. Video: https://www.youtube.com/watch?v=Ef-KE9Mwn2w
Compatible Cars
Originally published on thingiverse.com by matroosoft lastname (matroosoft) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
