Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 90% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| BMW_e36_Lift_Jack_Pad.stl | Printable file | 26.1 KB STL | Slice file | Slice file | Slice file | Use M5x20mm bolts for added strength |
| BMW_e36_Safety_Jack_Pad.stl | Accessory piece | 24.5 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 100–100% infill for durability. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Jack Pad / Adapter Block for BMW vehicle
Shared by
3DPrintedCarPartDescription
Replacement jacking / lift pad for BMW vehicles chassis that tends to get lost, and a pad to securely support the lifting point with a safety jack (when lifting with the side insert). IMPORTANT: m5x20mm bolts should be threaded down through the two holes in the top to add strength to the pegs that mount in to the chassis to prevent separation along layer lines. Since these can be considered a safety items and can cause injury if they fail while someone is working under the car, I feel that I need to post a disclaimer that this is just a model and I am not responsible for any resulting use or injury resulting from it.
Compatible Cars
Originally published on thingiverse.com by Maciej Wojtulewicz (macelius) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
