JBL GTO638 speaker adapter for Nissan NV200 - image

Files (1)

speaker_mount_6.stl

STL

85.6 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

13g

Based on 25% main infill across listed model files

Material cost

$0.31

Filament only at roughly $24/kg PETG / ASA

Print time

22m–36m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
speaker_mount_6.stl	Mount / bracket	85.6 KB STL	12g $0.28	13g $0.31	28g $0.67	Check the final orientation and support settings in your slicer before printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

JBL GTO638 speaker adapter for Nissan NV200

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Adaptor for Nissan NV200 U.S.A. version, fitting speaker JBL GTO638. Catalog note: JBL GTO638 speaker adapter for Nissan NV200 is a 3D-printable car-part listing indexed for classified fitment Nissan. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.