Jeep Cherokee XJ lower trim (Small) - image

Files (1)

Jeep_Trim_Small.stl

STL

60.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Jeep_Trim_Small.stl	Primary model	60.8 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trim Pieces

Jeep Cherokee XJ lower trim (Small)

0 downloads25 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

My Jeep Cherokee XJ was missing a few items, including this trim piece. This trim is for the right hand side, in between the wheel arch and passenger door. This is from the 4 door version and would not be suitable for the 2 door version. This is also for the pre-facelift version.