SMI Air Force 1 LED light holder for JEEP JKU - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trim Pieces

SMI Air Force 1 LED light holder for JEEP JKU

0 downloads38 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I tow a Jeep 4-down behind a Diesel Motorhome. A very popular auxiliary brake system for air braked coaches is the Air Force One system by SMI Manufacturing. The system alerts the coach driver that the towed vehicles brakes are being applied by a LED light strip in the towed vehicle. It is visible in the rear view monitor while driving the RV. Unfortunately, the LED strip comes with a small Velcro self-adhesive strip that is supposed to be stuck to the back of the rear view mirror in the towed vehicle. The sun heats up the Velcro adhesive, and it fails in very short order. This 3d printed part holds the LED light strip at the very top of the windshield of the towed vehicle. This part is designed to fit a JEEP Wranger's trim/windshield geometry. I am using 3m VHB tape to fasten this holder to the top trim piece just above the windshield. It's will hold the LED light strip horizontally, and very neatly out of the way. Before printing this part...I had to try to refasten my Velcro, or use blue painters tape to hold the led light strip up against the windshield. Sometimes that worked...and sometimes it failed. This will be a much more reliable way to get proper reporting of the braking system from my towed vehicle. If you own a JEEP and have the Air Force One brake system installed in it...Feel free to use this design...or remix it to your towed vehicles geometry.