Files (1)

jeep_tailgate_clip_v4.stl

STL

1.8 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
jeep_tailgate_clip_v4.stl	Clip	1.8 MB STL	Slice file	Slice file	Slice file	Use a smaller nozzle (0.4mm or 0.2mm) for better inner feature detail

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trim Pieces

JLU swing gate trim clip

0 downloads25 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I broke a couple of the green plastic clips that hold the plastic swing gate/tailgate trim on a Jeep Unlimited. Modeled these to serve as a temporary replacement until i can get replacements (06511829AA). Yes, they're ugly and there's stringing but they do in a pinch. I printed these in PLA with a 0.6mm nozzle with a 0.12mm layer height; recommend going to a smaller (0.4 or even 0.2) nozzle as i'm not getting the best result w/ the inner features. Also suggest printing w/ supports but you may need to tweak how you do those as to make getting the part out of them easier. The green clip in the photo is the (broken) OEM part; the black ones are the 3D printed versions.