Files (1)

CB_mounting_spacer.stl

STL

426.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
CB_mounting_spacer.stl	Mount / bracket	426.4 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Jeep TJ CB mount

0 downloads29 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The Rugged Ridge CB mount platform did not work for me, in my Jeep TJ. My CB radio would hit the side window when mounted per their instructions, not a good thing, and I was not a happy camper. So I made a platform to lift it up and away from the side window, and created a little cubby hole. I'm guessing it should also work for larger radios, but I don't have one to test it out.