Jeep YJ - Ashtray Replacement - Cell Holder Remix - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Jeep YJ - Ashtray Replacement - Cell Holder Remix

0 downloads33 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I liked this idea, I printed it and decided to make a couple changes: - added cut outs at the front for the OEM ears on the Jeep Astray mount. This keeps the strength in the actual OEM part and lets the Replacement fit snug. - located screw holes, that you can drill out if you need access to the factory screws to remove entire unit. - extended it to hold a bigger iPhone XS Max, lots of room out the back of OEM holder. - Added a front cap when not in USE - Added a bottom support to accommodate the extra length, this was handy for my sirius starmate 8 holder and provided extra strength when attaching everything together. The best was to print in face down to save time on printing and materials I left the back of the Ashtray Replacement open and created a back lid that can be glued on. I also removed the bottom support for the same reason. This thing goes together and fits great. I hope you enjoy this THING!!