Land Rover Defender 110 Dashcam mount for 2016 Elinz FHD Camera - image

Files (1)

LR_Defender_Dashcam_Mount_Elinz.stl

STL

109.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
LR_Defender_Dashcam_Mount_Elinz.stl	Mount / bracket	109.8 KB STL	Slice file	Slice file	Slice file	Ensure the camera is mounted to the bracket before installing it in the vehicle

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Land Rover Defender 110 Dashcam mount for 2016 Elinz FHD Camera

1 downloads137 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Needed a permanent place for my 2016 model Elinz dashcam to fit into my Land Rover Defender. I designed this to mount in the same mounting hole for the sun visor on the passenger side of the vehicle. It uses the same mounting screw for the sun visor and a ~10mm M4 or M3(can't remember, sorry) cap head bolt to mount the camera. The camera needs to be mounted to the bracket before the bracket is installed into the car as the access for the allen key is through the larger mounting hole.