Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 10% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Seat_Handle_V2.stl | Primary model | 991.5 KB STL | Slice file | Slice file | Slice file | Print with the logo surface in contact with the bed for optimal adhesion and surface finish. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Land Rover Defender Seat Handle
Shared by
3DPrintedCarPartDescription
I designed this seat handle for Land Rover Defenders which have an annoying tendency to break or get lost because they don't fit snugly against the metal support bar. Must be printed flat, logo surface in contact with the bed. There are 2 pins inside which "clip" the 2 metal pins. Must be clipped a little in force, but nothing more. Fair design, no play. 20% infill sufficient No support Any filament PLA Amazon Basic Orange Fluo Probe temperature at 110 ° Bed at 55 ° Resolution 0.2.
Compatible Cars
Originally published on thingiverse.com by CEDRIC GUICHAOUA (shiwawa) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
