Land Rover Defender L663 - Cargo ceiling hook base plate adapter - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Land Rover Defender L663 - Cargo ceiling hook base plate adapter

0 downloads45 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Add some proper ceiling hooks in your Defender! 3D printed base plate adapter allows the use of tie down anchors from Gmc/Chevy (Sierra, Silverado, Colorado) pickups. requires: to remove the cover plate from ceiling (see photo - careful with plastic pins), 3D print the above plate/adapter, 2x GMC/Chevy tie down 2x 3/8inx1.5in carriage bolt + washer + nut (note - I used some Perma Blue to cold bluing the steel bolt) I use the hook to add a cheap pet barrier/cargo divider with a jeep JK/JL cover.