License plate Dowel for Golf Mk 2 - image

Files (1)

Kennzeichen-D├╝bel.stl

STL

803.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Kennzeichen-D├╝bel.stl	Primary model	803.7 KB STL	Slice file	Slice file	Slice file	Ensure the seal is printed with a flexible filament like TPE/TPU for effectiveness.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

License plate Dowel for Golf Mk 2

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a 3D-Printable dowel for the screws of the license plate of an Golf Mk2. The stl contains a seal to put over the dowel so no or less water goes in. But the original does not use that so its not necessary! The seal is printed in TPE/TPU/Flexible filament.